SiSiB® SSA508 is a two-component, addition-curing silicone composition curing to a soft silicone adhesive. It offers high tack for strong and reliable initial adhesion.
Biocompatible
No by-products from curing process
High tack
Good adhesion
High transparency
Anti-allergenic, soft, and comfortable on skin
Excellent breathability
Resistant to microbial growth
Biodurable with low surface tension, thermal and chemical stability
Strong resistance to various media
Ethylene oxide–sterilizable for single or multiple use
Superior UV and aging resistance
Repositionable for precise placement
Color | A/B: Colorless |
Viscosity (mPa·s) | A/B: 12,000 |
Pot Life at 23°C (min) | 60 |
Mix. Ratio | 1:1 |
Penetration (1/10mm) | 200 |
Peel Strength (180°, N/2.5cm) | 0.8 |
These figures are only intended as a guide and should not be used in preparing specifications.
SiSiB® SSA508 is a medical-grade adhesive suitable for scar repair, wound care and surgical dressing manufacturing. Soft Skin Adhesives can quickly and firmly adhere to the skin while maintaining excellent permeability to moisture and gases such as oxygen and carbon dioxide, ensuring good exchange of the wound environment. Its stable cohesion and adhesion provide reliable fixation while being gentle and non-peeling on fragile or damaged skin, and can be removed painlessly, thus significantly improving the patient's experience and comfort.
When formulating an SSA-based device, substrate selection is critical: the substrate's properties dictate coating behavior and curing parameters during production, influence adhesive anchorage and post-cure cohesion, and ultimately determine the device's comfort and performance in wear.
SiSiB® SSA508 is supplied in 15Kg pail or 180Kg drum.
In the unopened and well-ventilated original container, SiSiB® SSA508 has a shelf life of 6 month in a dry and cool place.